Skip to main content

Void Miners

VoidGetting MinerStarted

Tgui.pngo get started mining things using your void miner you'll need to make yourself a Memory Programmer. Click Here for more in-depth information about how to use the Memory Programmer.

Installing Flash Memory

Once you have a programmed Flash Memory you can then open up the GUI of the Void Miner and place it in the slot in the middle as showingshowed in the picture.

Assuming you have the structure built correctly the Void Miner will then show a duration and Tick Cost in the GUI and you will also be able to open the GUI by right clicking any of the Structure Frames or Structure Panels.

The Duration is how long it will take the miner, provided that it has the tick cost worth of energy supplied, to mine an item. The Tick Cost is the energy required per tick to allow the miner to mine at the maximum speed that is currently possible with all modifiers included. If you don't provide the tick cost amount of energy or more then your Void Miner will be slower.

Modifiers

The following list are all the usable Modifiers in the Void Miners:

  • Frequency - This speeds up the void miner as long as you still have the energy to feed it.
  • Bandwidth - This increases the possible maximum stack size of each mined drop.
  • Amplification - This increases the likelihood of gaining drops based on what lens you have installed.
IO Blocks

There are two IO blocks that are essential for the Void Miner, you'll need at least 1 Item Output and at least 1 Energy Input IO Block. You can indeed use multiple of each of those IO blocks if you want to.

Back to top